Fluke 190-502-III-S

Description

• Bandwidth: 500 MHz
• Number of Channels: 2
• Sample Rate: 5 GS/s
• Kit includes SCC-293
• CAT III 1000 V/CAT IV 600 V rated portable oscilloscopes
• Connect-and-View™ triggering automatically displays waveforms without having to adjust amplitude, timebase and trigger settings
• Large, bright color display for easy in-the-field viewing and both USB and Wi-Fi data download options for analyzing data with FlukeView® software

Oscilloscope modes

• Number of channels: Two (2)
• Bandwidth: 500 MHz
• Rise time: 0.7 ns
• Number of scope inputs: 2 input channels plus external trigger
• Channel architecture: All inputs fully insulated from each other and from ground; Inputs may be activated in any combination
• Input coupling: AC or DC, with ground level indicator
• Input sensitivity: With 10:1 probe, 20 mV to 1000 V/div; With 100:1 probe, 200 mV to 10 kV/div; Direct (1:1), 2 mV to 100 V/div
• Bandwidth limiter: 20 MHz and 10 kHz
• Polarity: Normal, Inverted, Variable
• Vertical resolution: 8 bit
• Accuracy at 4 s to 10 μs/div: 5 mV/div to 100 V/div, ±(1.5 % + 6 counts); 2 mV/div, ±(1.5 % + 10 counts)
• Input impedance: 1 MΩ (± 1 %) // 15 pF (± 2.25 pF)
• Horizontal
• Maximum realtime sample rate (sampled simultaneously): 5 GS/s (single channel) or 2.5 GS/s (dual channel)
• Record length: Up to 10,000 samples per channel
• Time base range: 1 ns/div to 4 s/div; Time base in a 1-2-4-sequence; Slower time/division settings using ScopeRecord™ Roll mode
• Maximum record length: 10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecord™ Roll mode
• Timing accuracy: ± (0.01 % of reading + 1 pixel)
• Glitch capture: 8 ns (10 μs/div to 2 min/div)
• Display and acquisition
• Display: 133 mm x 90 mm (5.3 in x 3.5 in) full-color high brightness LCD
• Display modes: Any combination of channels; average on/off; replay
• Visible screen width: 12 divisions horizontally in scope mode
• Digital persistence modes: Off, short, medium, long, infinite and envelope mode
• Waveform mathematics: One (190-xx2) or two (190-x04) mathematical operations on 2 input channels (A and B, C and D): add, subtract, multiply; X-Y-mode; Frequency Spectrum using FFT
• Acquisition modes: Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture, waveform compare with automatic “Pass/Fail testing”; Replay
• Trigger and delay
• Source: Input A, B or External (via meter input)